FAQ
Find the answer you need.
Common questions about product selection, colour, documentation and maintenance.
Product & supply
Q.What information helps product selection?+
Share the application, substrate, preparation, application method and cure conditions. Include the current product, colour, gloss and estimated quantity.
Q.Can I ask without knowing the coating type?+
Yes. Describe where the coating will be used and the issue you need to solve. A product label, surface photo or specification can help.
Q.How can I check stock, order quantity and lead time?+
Provide the product code, colour, quantity, delivery location and required date. Tinted and made-to-order products may have different supply terms.
Q.What information is needed for an OEM supplier coating quotation?+
Provide the customer specification, approved product, substrate, preparation, colour, gloss, film thickness and cure conditions. Include consumption, pack size, delivery location and timing. An approved specification must be checked before proposing an alternative.
Q.Which records support coating batch traceability?+
Link material and hardener batches to receipt, opening, mixing, application conditions and finished parts. Keep approved and delivery samples identifiable. Record mixed batches and any customer documentation requirements.
Colour & tinting
Q.Can I order using the colour on screen?+
Screens are a reference for browsing. Confirm the final colour using the code, a physical standard and a coated panel. Substrate and gloss also affect appearance.
Q.What if I do not have a colour code?+
We can discuss a physical sample or an existing coated part. Send a photo, application and quantity to discuss sample review and colour matching.
Q.Will parts with the same colour code look identical?+
Appearance also depends on primer colour, film build, gloss and processing. Agree an approved panel made under production conditions and compare under consistent lighting. Record the product, batch and panel date.
Documents
Q.How do I request MSDS or TDS documents?+
Use the email button on the technical documents page. Include the product name, code and purchase details. Documentation is available for products supplied by Joongwon Chemical.
Q.Can one mixing or thinning ratio be used for all coatings?+
Base and hardener combinations, ratios, reducers and application conditions differ by product. Check the exact coating and components before use.
Q.What details help identify the correct MSDS or TDS?+
Provide the label name and code, manufacturer, component type, and available batch and purchase details. Similar product names may use different documents. Documentation is supplied for products purchased from Joongwon Chemical after verification.
Application & repair
Q.What should I provide for a coating defect enquiry?+
Send product and mixing details, substrate, preparation, application, temperature, humidity, cure conditions and defect photos. Include when and where the issue appeared.
Q.Can I coat directly over an existing finish?+
First assess the coating type, adhesion, contamination and corrosion. Surface preparation and compatibility determine the repair approach.
Q.Can weight and volume mixing ratios be interchanged?+
Do not interchange weight and volume ratios: component densities differ. Use the specified basis with suitable measuring equipment. Keep the ratio accurate when splitting packs and do not add extra hardener to accelerate cure.
Q.Can mixed paint be reused after its pot life by adding thinner?+
Thinner does not reverse the curing reaction. Do not blend expired mixed material into usable paint. Higher temperatures may shorten working time; mix manageable quantities and record time and temperature.
Q.How should coating thickness be checked on production parts?+
Use wet-film checks during application and suitable dry-film measurements after drying. Verify the gauge for the substrate. Inspect edges, welds and recessed geometry as well as flat areas against the agreed specification.
Q.Can a stored primed part be topcoated without further preparation?+
Check primer type, elapsed time, storage and contamination. Surface cleaning or abrasion may be needed outside the overcoating window. Validate the intended coating combination on a representative area before production.
Q.Does the oven setpoint alone confirm powder coating cure?+
Air temperature is not the same as part temperature. Measure the metal temperature and dwell time on representative parts. Recheck after changes in load, geometry or line speed, and use the agreed cure checks.
Q.Can coated parts be packed or assembled as soon as they feel dry?+
Surface dry, handling dry and full cure are different stages. Premature packing can cause imprinting or blocking. Trial the actual packaging materials and loading conditions and define the packing time accordingly.
Need more help?
Share your application and question with us.
